VBA in Excel - Properties, Methods and Events - 4

1: How to Select a Cell on the Active Worksheet

To select cell D5 on the active worksheet, you can use either of the following examples:

ActiveSheet.Cells(5, 4).Select

-or-

ActiveSheet.Range("D5").Select

2: How to Select a Cell on Another Worksheet in the Same Workbook

To select cell E6 on another worksheet in the same workbook, you can use either of the following examples:

Application.Goto ActiveWorkbook.Sheets("Sheet2").Cells(6, 5)

   -or-

Application.Goto (ActiveWorkbook.Sheets("Sheet2").Range("E6"))

Or, you can activate the worksheet, and then use method 1 above to select the cell:

Sheets("Sheet2").Activate

ActiveSheet.Cells(6, 5).Select

3: How to Select a Cell on a Worksheet in a Different Workbook

To select cell F7 on a worksheet in a different workbook, you can use either of the following examples:

Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Cells(7, 6)

-or-

Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("F7")

Or, you can activate the worksheet, and then use method 1 above to select the cell:

Workbooks("BOOK2.XLS").Sheets("Sheet1").Activate

ActiveSheet.Cells(7, 6).Select

4: How to Select a Range of Cells on the Active Worksheet

To select the range C2:D10 on the active worksheet, you can use any of the following examples:

ActiveSheet.Range(Cells(2, 3), Cells(10, 4)).Select

ActiveSheet.Range("C2:D10").Select

ActiveSheet.Range("C2", "D10").Select

5: How to Select a Range of Cells on Another Worksheet in the Same Workbook

To select the range D3:E11 on another worksheet in the same workbook, you can use either of the following examples:

Application.Goto ActiveWorkbook.Sheets("Sheet3").Range("D3:E11")

Application.Goto ActiveWorkbook.Sheets("Sheet3").Range("D3", "E11")

Or, you can activate the worksheet, and then use method 4 above to select the range:

Sheets("Sheet3").Activate

ActiveSheet.Range(Cells(3, 4), Cells(11, 5)).Select

6: How to Select a Range of Cells on a Worksheet in a Different Workbook

To select the range E4:F12 on a worksheet in a different workbook, you can use either of the following examples:

Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("E4:F12")

Application.Goto _

      Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("E4", "F12")

Or, you can activate the worksheet, and then use method 4 above to select the range:

Workbooks("BOOK2.XLS").Sheets("Sheet1").Activate

   ActiveSheet.Range(Cells(4, 5), Cells(12, 6)).Select

7: How to Select a Named Range on the Active Worksheet

To select the named range "Test" on the active worksheet, you can use either of the following examples:

Range("Test").Select

Application.Goto "Test"

8: How to Select a Named Range on Another Worksheet in the Same Workbook

To select the named range "Test" on another worksheet in the same workbook, you can use the following example:

Application.Goto Sheets("Sheet1").Range("Test")

Or, you can activate the worksheet, and then use method 7 above to select the named range:

Sheets("Sheet1").Activate

Range("Test").Select

9: How to Select a Named Range on a Worksheet in a Different Workbook

To select the named range "Test" on a worksheet in a different workbook, you can use the following example:

Application.Goto _

   Workbooks("BOOK2.XLS").Sheets("Sheet2").Range("Test")

Or, you can activate the worksheet, and then use method 7 above to select the named range:

Workbooks("BOOK2.XLS").Sheets("Sheet2").Activate

Range("Test").Select

10: How to Select a Cell Relative to the Active Cell

To select a cell that is five rows below and four columns to the left of the active cell, you can use the following example:

ActiveCell.Offset(5, -4).Select

To select a cell that is two rows above and three columns to the right of the active cell, you can use the following example:

ActiveCell.Offset(-2, 3).Select

Note An error will occur if you try to select a cell that is "off the worksheet." The first example shown above will return an error if the active cell is in columns A through D, since moving four columns to the left would take the active cell to an invalid cell address.

11: How to Select a Cell Relative to Another (Not the Active) Cell

To select a cell that is five rows below and four columns to the right of cell C7, you can use either of the following examples:

ActiveSheet.Cells(7, 3).Offset(5, 4).Select

ActiveSheet.Range("C7").Offset(5, 4).Select

12: How to Select a Range of Cells Offset from a Specified Range

To select a range of cells that is the same size as the named range "Test" but that is shifted four rows down and three columns to the right, you can use the following example:

ActiveSheet.Range("Test").Offset(4, 3).Select

If the named range is on another (not the active) worksheet, activate that worksheet first, and then select the range using the following example:

Sheets("Sheet3").Activate

ActiveSheet.Range("Test").Offset(4, 3).Select

13: How to Select a Specified Range and Resize the Selection

To select the named range "Database" and then extend the selection by five rows, you can use the following example:

Range("Database").Select

Selection.Resize(Selection.Rows.Count + 5, _

   Selection.Columns.Count).Select

14: How to Select a Specified Range, Offset It, and Then Resize It

To select a range four rows below and three columns to the right of the named range "Database" and include two rows and one column more than the named range, you can use the following example:

Range("Database").Select

Selection.Offset(4, 3).Resize(Selection.Rows.Count + 2, _

   Selection.Columns.Count + 1).Select

15: How to Select the Union of Two or More Specified Ranges

To select the union (that is, the combined area) of the two named ranges "Test" and "Sample," you can use the following example:

Application.Union(Range("Test"), Range("Sample")).Select

Note that both ranges must be on the same worksheet for this example to work. Note also that the Union method does not work across sheets. For example, this line works fine

Set y = Application.Union(Range("Sheet1!A1:B2"), Range("Sheet1!C3:D4"))

but this line

Set y = Application.Union(Range("Sheet1!A1:B2"), Range("Sheet2!C3:D4"))

returns the error message:

Union method of application class failed

16: How to Select the Intersection of Two or More Specified Ranges

To select the intersection of the two named ranges "Test" and "Sample," you can use the following example:

Application.Intersect(Range("Test"), Range("Sample")).Select

Note that both ranges must be on the same worksheet for this example to work.



Examples 17-21 in this article refer to the following sample set of data. Each example states the range of cells in the sample data that would be selected.

   A1: Name    B1: Sales    C1: Quantity

   A2: a       B2: $10      C2: 5

   A3: b       B3:          C3: 10

   A4: c       B4: $10      C4: 5

   A5:         B5:          C5:

   A6: Total   B6: $20      C6: 20

17: How to Select the Last Cell of a Column of Contiguous Data

To select the last cell in a contiguous column, use the following example:

ActiveSheet.Range("a1").End(xlDown).Select

When this code is used with the sample table, cell A4 will be selected.

18: How to Select the Blank Cell at Bottom of a Column of Contiguous Data

To select the cell below a range of contiguous cells, use the following example:

ActiveSheet.Range("a1").End(xlDown).Offset(1,0).Select

When this code is used with the sample table, cell A5 will be selected.

19: How to Select an Entire Range of Contiguous Cells in a Column

To select a range of contiguous cells in a column, use one of the following examples:

ActiveSheet.Range("a1", ActiveSheet.Range("a1").End(xlDown)).Select

   -or-

ActiveSheet.Range("a1:" & ActiveSheet.Range("a1"). _

      End(xlDown).Address).Select

When this code is used with the sample table, cells A1 through A4 will be selected.

20: How to Select an Entire Range of Non-Contiguous Cells in a Column

To select a range of cells that are non-contiguous, use one of the following examples:

ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select

   -or-

ActiveSheet.Range("a1:" & ActiveSheet.Range("a65536"). _

   End(xlUp).Address).Select

When this code is used with the sample table, it will select cells A1 through A6.

21: How to Select a Rectangular Range of Cells

In order to select a rectangular range of cells around a cell, use the CurrentRegion method. The range selected by the CurrentRegion method is an area bounded by any combination of blank rows and blank columns. The following is an example of how to use the CurrentRegion method:

ActiveSheet.Range("a1").CurrentRegion.Select

This code will select cells A1 through C4. Other examples to select the same range of cells are listed below:

ActiveSheet.Range("a1", _

   ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select

   -or-

ActiveSheet.Range("a1:" & _

   ActiveSheet.Range("a1").End(xlDown).End(xlToRight).Address).Select

In some instances, you may want to select cells A1 through C6. In this example, the CurrentRegion method will not work because of the blank line on Row 5. The following examples will select all of the cells:

lastCol = ActiveSheet.Range("a1").End(xlToRight).Column

lastRow = ActiveSheet.Cells(65536, lastCol).End(xlUp).Row

ActiveSheet.Range("a1", ActiveSheet.Cells(lastRow, lastCol)).Select

    -or-

lastCol = ActiveSheet.Range("a1").End(xlToRight).Column

lastRow = ActiveSheet.Cells(65536, lastCol).End(xlUp).Row

ActiveSheet.Range("a1:" & _

   ActiveSheet.Cells(lastRow, lastCol).Address).Select

22. How to Select Multiple Non-Contiguous Columns of Varying Length

To select multiple non-contiguous columns of varying length, use the following sample table and macro example:

   A1: 1  B1: 1  C1: 1  D1: 1

   A2: 2  B2: 2  C2: 2  D2: 2

   A3: 3  B3: 3  C3: 3  D3: 3

   A4:    B4: 4  C4: 4  D4: 4

   A5:    B5: 5  C5: 5  D5:

   A6:    B6:    C6: 6  D6:

StartRange = "A1"

EndRange = "C1"

Set a = Range(StartRange, Range(StartRange).End(xlDown))

Set b = Range(EndRange, Range(EndRange).End(xlDown))

Union(a,b).Select

When this code is used with the sample table, cells A1:A3 and C1:C6 will be selected.